Blitzer Beetle er inspirert av de tøffe og spennende off-road ørkenracerene fra USA. Chassiset er utstyrt med 4-hjuls dobbel wishbone hjuloppheng, CVA støtdempere, og off-road dekk med godt grep for å tilby suverene kjøreegenskaper i ulendt terreng. Har en lukket girkasse for å forhindre at smuss og rusk kommer inn. Følger også med en sjåfør samt et klistremerke ark for å skildre det brennende splash-mønsteret. Modellen leveres med en 540 børstemotor.
Behøves utenom som ikke er inkludert:
2-kanals fjernkontroll og mottaker
7.2V Ni-Mh batteripakke og lader
Fartsregulator
Styreservo
Lakk/maling til bodyen
Lim for å feste dekkene til felgene
Spesifikasjoner:
RC byggesett
Skala: 1/10
Lengde: 39,4 cm
Bredde: 29,5 cm
Høyde: 18,2 cm
Akselavstand: 26 cm
Terreng: off-road
Drift: 2WD bakhjulsdrift
Batteripakke: 7,2V Ni-Mh med Tamiya-kontakt (ikke inkludert)
Motor: Type 540 Børstetmotor (inkludert)
Body: ABS-plast (lakk/maling ikke inkludert)
Ytterligere informasjon på engelsk helt nederst.
Lakk/maling anbefalt av Tamiya:
TS-14 Black
X-2 White
X-3 Royal Blue
X-6 Orange
X-7 Red
X-18 Semi Gloss Black
XF-1 Flat Black
XF-2 Flat White
XF-7 Flat Red
XF-15 Flat Flesh
XF-16 Flat Aluminum
Informasjon på engelsk fra Tamiya:
| Type | Detail |
|---|
| Scale |
1/10 |
| Construction type |
assembly kit |
| Terrain use |
off-road |
| Drive-train |
2WD |
| Drive type |
gearbox |
| Drive line |
dog bone |
| Differential type |
gear |
| Suspension |
fully independent double wishbone |
| Steering mechanism |
direct servo |
| Shock damper |
oil-filled damper |
| Shock damper material |
plastic |
| Tire type |
rubber |
| Tire tread |
pin spike |
| Body material |
ABS Plastic |
| Chassis material |
plastic |
| Electronic Speed Control (ESC) |
included |
| ESC model |
No ESC |
| LED Light buckets |
no |
| LED lights |
no |
| Motor |
540-brushed type |
| Bearings |
plastic bushing |
| Adjustable camber |
yes |
| Adjustable toe angles |
front only |
| Adjustable ground clearance |
yes |
| Adjustable gear ratio |
fixed |
| Adjustable wheelbase |
fixed |
| Adjustable track width |
fixed |
| Adjustable shock angle |
fixed |
| Special feature 1 |
1/10 scale R/C assembly kit |
| Special feature 2 |
Kit includes FREE BONUS PARTS (1150 Ball Bearing x 8pcs.) First production run bonus only. 10/2011 |
| Special feature 3 |
The durable resin body is molded in white and comes with side mirror parts. The body may be painted with Tamiya´s TS spray paints, which are formulated in synthetic lacquer for the best finish and durability |
| Special feature 4 |
The tough, lightweight ABS bathtub chassis features a rear-mounted motor, rear-wheel drive layout |
| Special feature 5 |
4-wheel independent double wishbone suspension is equipped with C.V.A. oil filled shock units and extremely durable monocoque-type lower arms |
| Special feature 6 |
The front spiked tires feature three ribs for enhanced stability while the rear tires feature both spikes and an X-shaped tread pattern along the center to ensure high levels of grip |
| Special feature 7 |
Fully-enclosed gearbox protects against dirt and debris |
| Special feature 8 |
Driver figure included |
| Special feature 9 |
No ESC |
| Requires A |
7.2 battery & charger |
| Requires B |
2-channel radio gear |
| Requires C |
TS plastic model paint |
