KYOSHO NITRO TRACKER 1:10 RC NITRO 4WD READYSET W/KE15SP ENGINE

Meget spennende og moderne nitro nyhet fra Kyosho. Bestillingsvare, ca 14 dagers leveringstid. (Vi har tilsvarende modeller på lager, ta evt kontakt.)

PrisNOK4 790,00 inkl. mva.
Ønskeliste

Produktinfo

QRC + 2-speed automatic transmission delivers mind-blowing performance! Engine-powered R/C car recreates the feeling of driving a real car.

With the rock-solid running stability of a big tire machine with wide tread, the nearly square dimensions of the Nitro Tracker produces incredible driving capability. Take this 1/10 scale off-road truck anywhere you like to enjoy the advanced high-performance mechanics of this real engine-powered R/C car, such as the QRC (Quick Reverse Clutch) that enables forward, neutral and reverse operation. The 3rd channel on the KT-231P+ transmitter operates a servo to shift the gears on the QRC to change the drive gears between Forward-Neutral-Reverse, just like a real automobile. The pre-installed powerful KE15SP engine combines with the maintenance-friendly radio box and fuel pump that sends fuel efficiently to the carburetor from the fuel tank and engine-stop lever that safely brings the engine to a stop. With this Readyset, all you need is fuel, engine starting tools, and batteries to experience the dynamic realistic performance of the awesome Nitro Tracker !

  • Readyset features pre-assembled 4WD chassis with shaft-driven 4 bevel gear diffs on front and rear and finished body set.
  • 3rd channel operates the QRC system (Quick Reverse Clutch) to control forward, neutral and reverse.
  • 2-speed transmission with adjustable shift timing makes maximum use of the KE15SP engine’s power band.
  • One-piece stiffener and radio box increases chassis rigidity and provides dustproof cover for receiver and battery.
  • Includes waterproof KS4031-06W servos for steering, throttle and shift change.
  • Double wishbone suspension with adjustable camber and toe angle.
  • Body post height can be adjusted in 2mm increments..

Kit Contents 

  • Completed chassis with R/C radio installed
  • Transmitter (KT-231P +)
  • Binding stick
  • Hex wrench(1.5mm / 2mm / 2.5mm)
  • Cross wrench (large)
  • Instruction manual
  • 2 nylon straps (for fixing air cleaner)

Required for operation 

  • Glow fuel
  • 8 x AA batteries for transmitters and receivers
  • Starting tool (fuel pump, plug heater)

Technical data

  • Length　418.5mm 
  • Width　321mm 
  • Height　194mm 
  • Weight 2,650g(approx.)
  • Wheelbase　298.5mm 
  • Tread （F/R）　265mm
  • Tires (F/R interchangeable)　φ120×56mm
  • Gear Ratio　Forward (1st) 20.9:1 / (2nd) 13.9:1
    Reverse (1st) 24.1:1 / (2nd) 16.0:1 
  • Engine　KE15SP with recoil